 |
|
|||||
Thanks to its ingeniously located wedge insertion button CS 299 XL is fast and ideal when wedges do not need to be inserted or stacked in more than two areas across the corners, whereas the CS 299 M XL is more suitable with its position brake button if you are often inserting and stacking wedges in more than two positions across the corners. |
||||||
| The new and very powerful clamping system of the CS 299XL & CS 299M XL allows you to join up to 150mm ( 6’’) wide mouldings (+ rebate), regardless of their hardness or their finish. | ||||||
| Whether you are a custom or a contract framer , the CS 299 is designed for you ! |
||||||
| A) Wedge insertion button of CS 299 XL is mounted directly on top presser plunger arm ; the operator can with the same move place the firing system where he wants and then push on button to insert wedges. Rebate clamping is made by foot pedal. |
|
| A) To have hands free : CS 299M XL model : double action foot pedal for clamping and insertion of the wedges. Button on top serves as position blocking brake so that wedges can be inserted and stacked with no holding of the position. | |
| B) No pressure adjustment required for top presser when changing from soft to hardwoods No adjustment required when changing from small to tall mouldings within up to 50 mm (2") difference of height. | |
| C) No more worries about chops that do not profile well to each other ; the world’s most powerful rebate clamp system and its new system that makes the two jaws work together -this is the so-called Ultra system, corners are always perfectly profiled. |
|
| D) Adjustable fences (+/-90°) take the form of all kinds of mouldings at their back to prevent gaps on top or at bottom of assembly |
|
| E) Assembly angle is adjustable (+/-90°) to prevent any gap to inside or outside of corner. | |
F) During the whole joining process, the mouldings remain perfectly clamped. If wedges are to be inserted in several positions (areas) across the corner, the mouldings remain immobile, only the wedge distribution system will move. |
|
| Thanks to its ingeniously located wedge insertion button CS 299 XL is fast and ideal when wedges do not need to be inserted or stacked in more than two areas across the corners, whereas the CS 299 M XL is more suitable with its position brake button if you are often inserting and stacking wedges in more than two positions across the corners. | |
TECHNICAL SPECIFICATION |
|
| Mouldings width | 5mm (3/16") – maximum 150mm (6") + rebate |
| Mouldings height | 5mm (3/16") with special wedges #3 – 112 mm |
| Minimum dimensions of a frame | 85mm x 85mm (3"½ x 3"½) visibly. |
| Wedges (corner nails) sizes | 5-7-10-12-15 (from 3/16" to 5/8") normal and Hardwood types |
| # 3 (1/8") and #4 (5/32") excellent for filets | |
| Weight of machine | 80 kg |
| Dimensions | W 450mm (18") x L 490mm (19"½) x H 1130mm (45") |
| Energy needed | Compressed air at 6-7 bars (85-100 p.s.i.) |
| Average consumption | 5 litres / cycle |
|
Supports & Rubber supplied with the machine |
1 triangle supports Z 6532 with: 1 black rubber triangle (hard), 1 white triangle (soft) |
|
1 round rubber supports Z 15855 with - according to the moulding shape: 2 green rubber ends for hardwood types (1 short and 1 long) + 2 orange rubber ends for soft wood types (1 short and 1 long) |
|
| Options | 1.3m (52") Circular table extension with support |
Angle attachments for 6, 8-sided frames or for other forms |
|
| Special rubber ended furniture clamps for mouldings without rebate. |
|
|
|